Polymer EPDM rubber waterproofing membrane is recognized as a high elastic waterproofing material with the best performance among polymer waterproofing materials in the world. It is one of the most commonly used new chemical building materials in the world and one of the key promoted by the Ministry of Construction. Polymer EPDM rubber waterproofing membrane adopts the most advanced continuous extrusion and vulcanization production equipment and process in the world for producing polymer elastic rubber waterproofing membrane. It is computer controlled, with stable process, strict material selection, advanced formula, and production organized according to ISO9001 quality system. The entire production process is always under control to ensure the high performance and high quality of the product, so that the polymer EPDM rubber waterproofing membrane has better density, no bubbles, and no vertical and horizontal performance differences.
High molecular weight EPDM rubber waterproofing membrane has the characteristics of single-layer construction, cold operation, light weight, aging resistance, long service life, high tensile strength, large elongation, strong adaptability to base shrinkage and deformation, wide operating temperature range (-40℃ to 100℃), etc. It has excellent waterproof performance and a service life of up to 50 years, and is known as the “king of waterproofing”.
Excellent anti-aging performance, service life can reach 50 years.
Extremely high elongation, relatively high tensile strength, small dimensional change after heat treatment.
It has good resistance to plant root penetration and can be made into a waterproof layer for planted roofs.
The special modified molecular structure effectively solves the shortcomings of EPDM adhesive overlap at home and abroad.
Good flexibility at low temperature and good adaptability to ambient temperature changes.
Easy to construct, firm and reliable overlap, no environmental pollution.
Resistant to chemical corrosion, can be used in special occasions.
Good perforation resistance, convenient detail processing, easy maintenance and low cost.
Used for waterproofing of roofs and underground projects of civil and industrial buildings, water tanks, municipal works, bridges, subways, tunnels, dams and other projects
Especially suitable for key waterproofing projects with high requirements for durability and corrosion resistance and easy deformation.
The base layer should be flat, dry and clean, and should not be loose, sandy or peeling.
Before construction, the base layer should be cleaned and foreign objects should be removed.
Spread the waterproofing membrane completely on the base layer to relax the stress of the sheet. Apply the base layer glue to the base layer and the surface of the sheet according to the amount used. When the adhesive is basically not sticky, lay it flat and compact it.
When laying the second roll of the membrane, leave 100mm on the overlapping edge of each roll, do not apply the base layer glue, and lay the sheet on the base layer according to the requirements of 3 to complete the entire laying work. When laying, never tighten the waterproofing membrane violently.
After the base layer is laid, use a special solvent to wipe the overlapping parts, and apply the overlapping glue to both sides of the joint after it is fully dried. After the glue is fully dried, apply it a second time. After the glue is dry and not sticky, use a roller to flatten and compact it.
Pay attention to fire prevention during construction. The closed construction site of the basement must be equipped with good ventilation facilities before construction.
No. | Project | JL1 | JF1 | |
1 | Tensile strength/MPa | Normal temperature (23℃) ≥ | 7.5 | 4.0 |
High temperature (60℃) ≥ | 2.3 | 0.8 | ||
2 | Elongation at break/% | Normal temperature (23℃) ≥ | 450 | 400 |
Low temperature(-20℃) ≥ | 200 | 200 | ||
3 | Tear strength KN/m ≥ | 25 | 18 | |
4 | Water impermeability, 0.3Mpa 30min | No leakage | No leakage | |
5 | Low temperature bending | -40°C no cracks | –30°C no cracks | |
6 | Heating expansion/mm | Extend ≤ | 2 | 2 |
Shrink ≤ | 4 | 4 | ||
7 | Hot air aging (80°Cx168h) | Tensile strength retention% ≥ | 80 | 90 |
Tensile elongation retention%≥ | 70 | 70 | ||
8 | Alkali resistance [saturated Ca(OH)₂ solution 23℃x168h] | Tensile strength retention% ≥ | 80 | 80 |
Tensile elongation retention%≥ | 80 | 90 | ||
9 | Artificial climate aging | Tensile strength retention% ≥ | 80 | 80 |
Tensile elongation retention%≥ | 70 | 70 |
With more than 20 years of experience in waterproofing, our team can provide customized waterproofing solutions based on your specific needs.
Long service life (30 years for rooftops and more than 50 years for underground) and no environmental pollution.
The products produced by Yuru are suitable for various projects ranging from residential buildings to large-scale municipal projects, ensuring effective waterproofing in any environment.
We have compiled the most frequently asked questions about our waterproof materials here for your convenience, but please feel free to contact us if you have any additional questions.
EPDM rubber is a waterproof material that is ideal for flat roofs. Due to the material structure, the membrane is waterproof, ensuring your roof is protected during rainy and wet periods.
Yes, our products are non-toxic, odorless, and safe for both the environment and users.
With MOQ of 100 sqm, you can ensure your order. Meanwhile we support customized orders.
It takes us around 2 to 5 business days to produce the waterproof membranes. On the other note, the transit time will take 10 to 15 business days. Reach us online for your custom and bulk orders so we can explain the actual turnaround time based on the specific details of your order.
Surely! You can always request a sample before place the bulk order. Sample time usually will take 2-3 days, depends on the specifications you need.
Request a sample now!
Yes, we can make the waterproof membrane according to requirements to meet specific needs.
Absolutely, we have specialized products that are safe and ideal for potable water applications.
Yes, our solutions are suitable for both new construction and renovation projects.
If you’ve got polyurethane waterproof coating concerns and specific requirements, it’s time to speak to one of our Industry Experts. We’re glad to answer any questions you may have!
”From planning to delivery, it has been a smooth and gratifying transaction. The YURU Waterproof team is quickly responsive, and their waterproof paints are top-grade! In the end, they deliver as promised, and more. We look forward to a long-term partnership with them.”